|
Product Code: Centurion-F 
Our Centurion 2 wire covert headset is made with kevlar reinforced cable and will withstand a breaking force of up to 20kg at the connector strain relief.
LARGE FRONT FACING PTT The shape of the PTT has been developed in response to the request for a larger, front facing PTT. This gives it 2 distinct advantages
- It is easier to locate with gloves on
- It can't be accidently operated by body armour or kit knocking against it.
The switch is tested to 2 million presses.
HIGH NOISE MICROPHONE The Microphone is suitable for High noise environments and is worn a hand's distance from the mouth on the chest. The cable is made with Kevlar reinforcement. Fitted with secured plug for the side connector on Motorola MTH650 MTH800 MTP850 CEP400 The Centurion headset was previously only available in the USA for the law enforcement.
A coiled section of cable just after the radio connector acts as a damper should your radio fall or be accidentally dropped and allows unbroken radio contact in the rest room without the need to remove tucked and loomed cabes or the radio!
FEATURES: - Flat larger front facing PTT with built in microphone.
- Postive feel PTT when pressed
- High noise microphone.
- Sprung Microphone clip for lapel or covert, inside a shirt / jacket sleeve
- Acoustic tube curly earpiece with clip.
- The earpiece attaches to a collar and is worn in the ear in the same way by TV presenters and Security services operatives.
1 year NO QUIBBLE warranty If your Centurion headset should get broken and you return it to us within 1 year of purchase we will replace it with a new headset.
 SPECIFICATIONS PTT block Dimension 45mm x 25mm - switch is 25mm x 25mmTransducer diameter = 16mm Cable = 5.0mm diameter from plug to joiner. Length 340mm with 110mm coiled section Cable to ear and PTT/mic diameter = 3.0mmLength from Joiner to ear transducer = 355mm (14") with 60mm coiled sectionLength from Joiner to PTT block = 890mm (35")
For extra comfort a Skeleton earpiece can be used to replace the eartip on the end of the earpiece. (see below).
|