|
Product Code: 26-900-PH10 Robust double sided headset. We've had no physical breakages on our hire stock. Heavy though when worn up in the trussing but good noise isolation next to the arrays!
SPECIFICATIONS: TECH SPECS - 150 ohm mic
- Dynamic
- 150 ohm driver
- 16 oz
- 24dB NRR EPA
- 1.5m XLR4M cable
- 50Hz to 15kHz mic
- 100Hz to 8KHz speaker drivers
FEATURES: Great headset. But Telex please note it's expensive compared to the field. We give this headset out to lighting technicians who sit up in the Spot Pods hanging from the Lighting rigging. Usually they are next to the PA speaker stack. We give them this headset because its tough (not indestructable one monster managed to snap one in half in a temper I guess) but the mic seems to be the cleanest when the music is loudest and the drivers are a little lower impedance giving more output. The ear cushions could be affixed with a non sticky double sided tape as the adhesive does not stand up to the highest heat in the lighting truss always. It does reset though.
| UNIT | COST | 1 - 4 days
| £10.00 | 5 - 8 days
| £20.00 |
|
